北京德泰科閥門有限公司
進口調節閥,進口球閥,進口截止閥,進口減壓閥,進口蝶閥,進口閘閥,進口高壓小型球閥,進口小型高壓球閥,進口…
產品
| 產品型號︰ | 進口高壓電動調節閥 |
|---|---|
| 產品規格︰ | 進口高壓電動調節閥 |
| 產品品牌︰ | 美國威盾 |
| 產品單價︰ | 231/台 |
| 供貨總量︰ | 123 |
| 最小訂量︰ | 1 |
| 發布時間︰ | 2022-11-24 21:45 |
| 有效期至︰ | 2023-04-24 |
詳情描述
企業介紹
立即咨詢
進口高壓電動調節閥
關鍵詞︰進口高壓電動調節閥，進口電動高壓調節閥，進口超高壓調節閥，高壓力調節閥
概述︰進口高壓電動調節閥采用鍛造閥體，采取多級迷宮式的閥芯結構，最高使用壓力可達到80Mpa，4500Lb，用于火電的高壓系統、礦井下的高壓系統的電動調節閥，產品經過多次的改進，不繼完善，具有新穎性和先進性。
High pressure electric control valve forged body, take the spool of multi-level labyrinth structure, the maximum pressure can reach 80Mpa 4500Lb high-pressure system for thermal power, the electric control valve of the high-pressure system in the mine, the product has been repeatedlyimprovements, not following the perfect novel and advanced
進口高壓電動調節閥特征Structure
1、本系列產品采用完合拆裝式結構，操作力距小，閥腔內件（包括閥座、
閥芯、節流組件、密封件等）均可從並閥腔取出，維護保養十分方便，閥體不需從管道上割下，可長期使用。
This series of products together with complete disassembly structure, operation torque is small, the valve chamber pieces (including the seat,
Valve, throttle assemblies, seals, etc.) can be removed from the chamber and the valve, maintenance is very convenient, valve body do not have to be cut from the pipeline,can be long-term use
2、閥芯為柱塞體平衡式結構，操作力距小，調節靈敏高。
Spool is balanced plunger body structure, operating torque, the adjustment of high sensitivity.
3、節流組件由多孔板集流式節流環與套筒式節流套組成，且配以均流罩，
因此具有小流量高壓差無氣蝕、大流量、調節性能好，流體排出梳流無噪音的綜合特性，完全滿足了高壓差等苛刻工況的要求，有效地實現了高溫、高壓差流體的流量調節控制，可調性好，調節精度高。
Throttling component from the porous flow restrictor plate set ring set with integral throttle sleeve, and supported by both flow hood, therefore, no pressure differential with low flow cavitation, the flow, regulated performance, drain fluid flow without noise comb, fully meet the harsh conditions of high pressure and poor requirements, effective implementation of the high temperature and pressure differential control of fluid flow control, adjustable, good regulation and high precision.
4、節流環可在閥門工作行程的55%之內，實現多級減壓節流
Cutting ring can be achieved in multi-stage vacuum throttle valve work within 55% of stroke.
5、閥芯和閥座密封面堆焊司鈦萊硬質合金，抗沖刷、耐蝕。
Core and valve seat sealing surface is welded titanium Levin Secretary carbide, anti-erosion and corrosion resistance.
歡迎您來電來郵咨詢
電話︰010-59430603 010-57039662 手機︰15910656008
進口高壓電動調節閥http://www.bjfmc.net
電動高壓調節閥http://www.dtyco.net